18
LOCKING FEATURES
The two locking features, TEMPERATURE LOCK and SPA LOCK, are enabled from the control panel by pressing a specific combination of buttons. Once enabled, a
lock will remain active until the specific button combination is applied to disable the lock. Even if power is disconnected from the spa and soon thereafter reapplied
(such as after a power outage), the lock will remain in place.
Spa Lock
The Spa Lock feature deactivates all of the functions of the control panel. It is generally used to prevent unwanted use of the spa.
To activate the Spa Lock, press
+
+
within 3 seconds.
To deactivate the Spa Lock, press
+
+
within 3 seconds.
Temperature Lock
The Temperature Lock feature deactivates the temperature control function from the control panel. All other functions on the control panel will operate normally.
Temperature Lock is most often used by those who do not want others to change the set temperature of the spa water.
To activate the Temperature Lock, press
or
+
+
+
within 3 seconds.
To deactivate the Temperature Lock, press
or
+
+
+
within 3 seconds.
Control Panel Buttons and Display
Your spa control system consists of an illuminated Liquid Crystal Display (LCD) and convenient touch pads that allow you to set the water temperature as well as the
hydrotherapy jets, mood light and optional jets from the spa control panel.
Display Inversion
You may invert the main, four-digit display for easier viewing from inside the spa. Press either
or
then
within 3 seconds.
Temperature Control
The set temperature range is from 80°F to 104°F (the temperature of any setting may rise slightly depending on the current use and condition of your spa, and on
outside temperature).
The set temperature of the spa water will automatically be 100°F the first time power is applied. This is the setting programmed at the factory. After the spa has been set
up and used, the last temperature value set by the user will be stored in memory. If power is disconnected from the spa, it will automatically revert to the last set
temperature when power is reapplied.
OPERATING INSTRUCTIONS
Mode touch pad
Is used to initiate
advance panel feature
WARM (up) touch pad
Increases the temperature
LIGHT touch pad
Controls the interior and exterior
fiber optic lighting
LIGHT touch pad
Controls the interior and
exterior fiber optic lighting
JETS touch pads
Controls
Jet pumps 1 and 2
AIR JETS touch pad
Controls the Air Jets
COOL (down) touch pad
Decreases the temperature
setting
AIR JETS touch pad
Controls the Air Jets
Main Control Panel
Auxiliary Panel
JETS touch pads
Controls
Jet pumps 1 and 2
