Page 17
AUTO CLEAN CYCLE
Your spa is equipped with an Auto Clean Cycle, this feature when
enabled, will turn on the hydromassage jets in a preset sequence for 10
minutes every day at the same time.
To activate the Auto Clean Cycle wait
for the time of day you would like the
automatic feature to start, then follow the
steps below:
Press the OPTIONS hard button on the Main Control panel.
Press the soft button next to
Set-Up
.
Press the soft button next to
More.
Press the soft button next to
Auto Clean Cycle
to
On
to start the cycle.
To disable the automatic daily clean cycle, press the soft button next to
Auto Clean Cycle
so it reads
Off
.
VANISHING ACT CYCLE
The
VANISHING ACT
Cycle will activate the jets for 6 hours, ONLY to
be used with
VANISHING ACT
(see page 11)
• Press the OPTIONS hard button on the Control panel.
• Press the soft button next to
Set-Up.
• Press the soft button next to
More.
• Press the soft button next to
Vanishing Act.
AUDIO CONTROL (OPTIONAL
WIRELESS SYSTEM ONLY)
The following applies to spas that have
CALDERA
wireless sound
system installed:
When the sound system has been installed on the spa, the control panel
can be used to control the music system. The following information
demonstrates how to navigate through the audio menu by using the
spa’s main control panel.
AUDIO MENU
Once the sound system is installed,
an
AUDIO
menu will be accessible
from the Home screen.
To access the menu, press the soft
button next to
Audio
on the Home
screen.
TO TURN AUDIO SYSTEM ON/OFF
From the AUDIO menu:
• Press the soft button next to
Audio
to turn the Sound System on or off.
Audio must be ON to advance the audio screens.
IMPORTANT:
The power can take a few seconds to turn on or off.
TO PAIR BLUETOOTH
1. Press the
Function:SET
soft
button 3 times to advance to
the
Enter Setup
screen. Press
the
Enter Setup
soft button to
advance to the
Setup Source
screen. Bluetooth should be
selected.
2. Press
SETUP Source
soft button 6 times from
SETUP Source
screen to advance to the PAIR screen.
On your device, find
My Spa BTXR
. If you DO NOT see this, another
device may already be connected (see To Disconnect Bluetooth on
following page).
3. Press
PAIR
soft button followed by pressing "connect" next to
My
Spa BTXR
on your device to pair.
After pairing, you will be ready to use your Bluetooth device. Only one
paired Bluetooth device will work at a time.
TO ADJUST VOLUME
From the AUDIO menu:
•
Press the soft button next to ▲ or ▼
to change the volume level.
• Press the
Function:SET
soft button
to advance to the Play/Pause function
screen.
NOTE: Volume range is from 0-40. No
number displayed indicates Volume is OFF
TO PAUSE/PLAY (SONG)
From the AUDIO menu:
• Press the
Function:SET
soft button
to advance to the Play/Pause
function screen.
• Press the soft button next to
PLAY/
PAUSE
(top right corner) to play or
pause music.
NOTE:
Some audio sources will display song title.
TO CHANGE TRACK (SONG)
From the AUDIO menu:
• Press the
Function:SET
soft button
to advance to the Play/Pause function
screen.
• Press the
Function:PLAY Play/
Pause
soft button to advance to the
Track function screen.
• Press the
FORWARD
or
BACK
soft buttons to change the track
(song).
TO GO TO SETUP MENU
From the AUDIO menu:
• Press the
Function:SET
soft button
to advance to the Play/Pause function
screen.
• Press the
Function:PLAY Play/
Pause
soft button to advance to the
Track function screen.
• Press the
Function:PLAY Track
soft
button to advance to the Setup function screen.
• Press the
ENTER SETUP
soft button to scroll to the
SETUP
SOURCE
screen.
Operating Instructions
