background image

Page 15

AUDIO

If you purchased music or TV accessories with your spa, this feature will 

take you to the Audio menu.

IMPORTANT: 

Some soft key functions will only be visible if available 

accessory has been installed.

CLEAN  

Provided as a convenient timer for water maintenance, this function 

activates the jet pump on high for a ten minute period. The jet icon will 

flash to indicate the jet pump is engaged and in the Clean cycle. During 

this cycle add properly measured spa water chemicals into the filter 

compartment. The jet pump and clean icon will automatically shut off 

after ten minutes.

TEMPERATURE CONTROL 

The set temperature range is from 26°C  to 40°C (80°F to 104°F). (The 

water temperature of any spa may rise or lower slightly depending on the 

current use and condition of your spa and on outside temperatures.)
The set temperature of the spa water will automatically be 38°C (100°F) 

the first time power is applied. This is the setting programmed at the 

factory. After the spa has been set up and used, the last temperature 

value set by the user will be stored in memory. If power is disconnected 

from the spa, it will automatically revert to the last set temperature when 

power is reapplied.
To display the set temperature of the spa:

Press the OPTIONS hard button on the Main Control panel.
Press the soft button next to 

Temperature

. The set temperature screen 

will be displayed. This screen will automatically revert to the Home 

screen after 45 seconds of non-use.

To increase the set temperature of the spa water:

Press the OPTIONS hard button on the Main Control panel.
Press the soft button next to 

Temperature

Press the soft button next to 

▲. 

Each time the button is pressed, the 

set temperature display will increase 

by 1

°

C. If the button is held down, 

the set temperature display will 

increase by .5

°

C every half-second. 

To decrease the set temperature of the spa water: 

Press the OPTIONS hard button on the Main Control panel.
Press the soft button next to 

Temperature

Press the soft button next to 

▼. Each time the button is pressed, the 

set temperature display will decrease by one degree. If the button is held 

down, the set temperature display will decrease by one degree every half-

second.

If the set temperature value does not change, check to see whether 

the TEMP LOCK or SPA LOCK features are on. When either of these 

features is activated, the temperature control is disabled. 
The temperature can be displayed in Fahrenheit or Celsius. Press the 

soft button next to the 

°F/°C

 to choose one or the other.

LOCKING FEATURES

The two locking features, Temperature Lock and Spa Lock, are activated 

at the main control panel. Once activated, a lock will remain active until 

the specific button combination is pressed to disable the lock. Even 

if power to the spa is disconnected even briefly, the lock will remain 

activated.

TEMPERATURE LOCK

When activated, the Temperature Lock feature prevents a change in your 

desired water temperature setting. All other functions on the main and 

auxiliary control panels will operate normally while the temperature lock is 

"ON". This feature prevents others from changing the desired settings.
 To activate the Temperature Lock:
•  Press the OPTIONS hard button on the Main Control panel.
•  Press the soft button next to Temperature.
•  Press the soft button next to Temp Lock Off to change the screen to 

Temp Lock On.
IMPORTANT: The Temperature/Spa lock icon will be displayed during 

a temperature lock condition.

To deactivate the Temperature Lock:
•  Press the OPTIONS hard button at 

the Main Control panel. 

•  Press the soft button next to 

Temperature

•  Press the soft button next to Temp 

Lock On to change the screen 

to Temp Lock Off and turn the 

Temperature lock and icon off.

LOCK OVERRIDE

The Lock Override feature is for spa users who normally keep the set 

temperature locked. Should you wish to lock all spa controls temporarily, 

the spa lock can be applied over an already-applied temperature lock. 

Then, when the spa lock is removed, the temperature lock will remain on 

to prevent unwanted tampering with the set temperature. 

SPA LOCK 

When activated, the Spa Lock feature disables all functions on the main 

and auxiliary control panels. It prevents others from tampering with the 

jets, lights and temperature settings on your spa. The control panel will 

not respond to any hard or soft buttons when in Spa Lock mode.
To activate the Spa Lock:
•  Press the OPTIONS hard button. 
•  Press the soft button next to Set-up.
•  Press the soft button next to Spa 

Lock Off.

IMPORTANT: 

The Temperature/Spa 

Lock icon will be displayed during a 

spa lock condition.
To deactivate the Spa Lock: 

•  Press and hold the OPTIONS hard button and the LIGHTS hard button 

at the same time for 3 seconds. The spa lock will be disabled and the 

icon will turn off.

IMPORTANT:

 You can activate the spa lock feature even when 

the temperature lock is already on. You do not need to turn off the 

temperature lock in order to turn on the spa lock feature. If the 

temperature lock is already on when you activate the spa lock, it will 

remain on when you turn off the spa lock.

Operating Instructions

Содержание Makena













































Отзывы: