background image

22

DIVERTER VALVE MAINTENANCE

If your spa’s diverter valves become difficult to turn, it is likely that sand or grit has become lodged inside the valve body. It is very important that this debris is removed
as soon as possible to avoid damage to the valve. To accomplish this, follow this procedure:

1. Turn off power to the spa.

2. Remove the diverter valve’s handle by pulling upward while rocking it back and forth.

3. Unscrew the cap ring.

4. Remove the valve body by pulling it upward.

5. Wipe the valve body and the interior walls of the valve clean.

6. Lubricate the o-rings with a waterproof lubricant available from your Caldera dealer.

7. Reassemble the valve and turn on power to the spa.

CARE OF THE EXTERIOR

SPA SHELL

Your Caldera

®

spa has a granite-like or smooth acrylic shell. Stains and dirt generally will not adhere to your spa’s surface. A soft rag or a nylon scrubber should easily

remove most dirt. Most household chemicals are harmful to your spa’s shell. Watkins

®

Manufacturing Corp. recommends Soft Scrub

®

and Windex

®

. These are the only

products which have passed the manufacturer’s tests. Sodium bicarbonate (baking soda) can also be used for minor surface cleaning. Always thoroughly rinse off any
spa shell cleaning agent with fresh water. 

SERVICE NOTES:

1. Iron and copper in the water can stain the spa shell if allowed to go unchecked. Ask your Caldera dealer for a stain and scale Inhibitor to use if your spa water has a

high concentration of dissolved minerals. 

2.  The use of alcohol or any household cleaners other than those listed to clean the spa shell surface is NOT recommended. DO NOT use any cleaning products

containing abrasives or solvents since they may damage the shell surface. 

NEVER USE HARSH CHEMICALS! 

Damage to the shell by the use of harsh chemicals

is not covered under the warranty. 

IMPORTANT:

Some surface cleaners contain eye and skin irritants. Keep all cleaners out of the reach of children and use care when applying.

CARE OF THE SPA COVER

WARNING:

The cover is a manual safety cover that meets or exceeds all prevailing requirements of ASTM Standards for spa safety covers when installed and used

correctly as of the date of manufacture. Non-secured or improperly secured covers are a hazard. Open the cover to its fully open position before use.

VINYL COVER

The vinyl spa cover is an attractive, durable foam insulation product. Monthly cleaning and conditioning are recommended to maintain its beauty.

To clean and condition the vinyl cover:

1. Remove the cover from the spa and gently lean it against a wall or fence.

2. With a garden hose, spray the cover to loosen and rinse away dirt or debris.

3. Using a large sponge and/or a soft bristle brush, and using a very mild soap solution (1 teaspoon dishwashing liquid with 2 gallons of water) or baking soda (sodium

bicarbonate), scrub the vinyl top in a circular motion. Do not let the vinyl dry with a soap film on it before it can be rinsed clean.

4. Scrub the cover’s perimeter and side flaps. Rinse clean with water.

5. Rinse off the underside of the cover with water only (use no soap), and wipe it clean with a dry rag.

SERVICE NOTE:

To remove tree sap, use cigarette lighter fluid (not charcoal lighter fluid). Use sparingly, and rinse with a saddle soap solution immediately

afterwards, then wipe dry.

Important reminders:

DO

remove snow buildup to avoid breakage of the foam core from the additional weight of the snow.

DO

lock cover lock straps to secure the cover when the spa is not in use.

DO NOT

drag or lift the spa cover using either the flaps or the cover lock straps.

DO NOT

walk, stand, or sit on the cover.

DO NOT

place any metal or heat transferring object on the cover or place any type of plastic tarp or drop cloth over the cover as this may result in a melted

foam core, which would not be covered under the warranty.

DO NOT

use any lifting mechanisms, chemicals or cleaners except those recommended by Watkins

®

Manufacturing Corporation or its Authorized Sales and

Service Dealer

MAINTENANCE

Содержание Highland Series

































Отзывы: