CALDER 21001119, Руководство по эксплуатации

Страница: 30 / 64

Page 16 Pilot Valve Tester Operating Manual
WARNING
All units must be stabilized for the safety of the operator. The operator
must determine what is necessary to provide a safe environment.
DANGER
Position the machine so that high-pressure venting (either from the
machine or the safety relief valve under test) is not orientated towards
personnel or nearby equipment. Failure to do so may result in machine
damage or personnel severe injury or death.
3.3.1 Cement in place (option 1 – recommended)
Cement the anchor bolts into the floor. The exposed threads of the anchor must
protrude a minimum of two threads past the nut and washer. See Figure 3-1.
3.3.2 Drill and anchor (option 2)
Drill holes into the floor for an expanding type anchor sleeve. A 0.5" (12.7 mm)
lag bolt will require a minimum of 1.5" (38.1 mm) thread engagement. See Figure
3-1.
F
IGURE
3-1. S
ECURING THE TEST STAND COMPONENTS
2
3
4
5
7
8
9
10
6
1
11
12
T
ABLE
3-1. C
OMPONENTS TO SECURE THE TEST STAND
Number Component
1 Test unit base
2 Nut
3 Minimum 2 threads clearance