CALDER 21001119, Руководство по эксплуатации

Страница: 16 / 64

Page 2 Pilot Valve Tester Operating Manual
CAUTION
indicates a hazardous situation which, if not avoided, could result in
minor or moderate injury.
NOTICE
indicates a hazardous situation which, if not avoided, could result in
property damage, equipment failure, or undesired work results.
1.3 G
ENERAL SAFETY PRECAUTIONS
CLIMAX leads the way in promoting the safe use of portable machine tools and
valve testers. Safety is a joint effort. You, the end user, must do your part by being
aware of your work environment and closely following the operating procedures
and safety precautions contained in this manual, as well as your employer’s safety
guidelines.
Observe the following safety precautions when operating or working around the
machine.
Training –
Before operating this or any machine tool, you should receive
instruction from a qualified trainer. Contact CLIMAX for machine-specific
training information.
Risk assessment –
Working with and around this machine poses risks to
your safety. You, the end user, are responsible for conducting a risk assess-
ment of each job site before setting up and operating this machine.
Intended use –
Use this machine in accordance with the instructions and
precautions in this manual. Do not use this machine for any purpose other
than its intended use as described in this manual.
Personal protective equipment –
Always wear appropriate personal pro-
tective gear when operating this or any other machine tool.
Work area –
Keep the work area around the machine clear of clutter. Restrain
cords and hoses connected to the machine. Keep other cords and hoses
away from the work area.
Lifting –
Many CLIMAX machine components are very heavy. Whenever
possible, lift the machine or its components using proper hoisting equip-
ment and rigging. Always use designated lifting points on the machine.
Lock-out/tag-out –
Lock-out and tag-out the machine before performing
maintenance.
Moving parts –
CLIMAX machines have numerous exposed moving parts
and interfaces that can cause severe impact, pinching, cutting, and other
injuries. Except for stationary operating controls, avoid contact with mov-
ing parts by hands or tools during machine operation. Remove gloves and