CalAmp | TTU-7xx Install Guide
Page 14
MBUD-0239v2
For rust or loose paint use a wire crush and acetone
8.
Mount device and ensure all four (4) magnets are engaged.
9.
If required, drill ¼” hole in frame member and pass lanyard through; otherwise, loop lanyard around
the frame member.
10.
If required, deburr hole and remove metal shavings from cross member surfaces.
11.
Paint all exposed metal surfaces in and around holes with a rust preventative paint. Allow paint to
dry 10 minutes.
12.
Feed threaded link through lanyard loops and lanyard clip.
13.
Apply blue Loctite to threaded link threads.
14.
Tighten threaded link with two Crescent wrenches.
Figure 8: Tighten Threaded Link with Two Crescent Wrenches