CalAmp | TTU-7xx Install Guide
Page 8
MBUD-0239v2
6 DRY VAN AND REEFER NOSE MOUNT INSTALLATION
The following steps outline the procedure for Dry Van and Reefer Nose Mount Installation. Prior to
beginning the installation, verify that you have the proper tools and materials.
Tools and Materials:
Cordless Drill
9/64” Drill Bit
Magnetic Apex Driver Bit – 5/16”
Scratch Awl
Safety
To Install the Dry Van and Reefer Nose Mount:
1.
Tag equipment with appropriate signage to indicate Lockout/Tagout procedure is in process.
Installers should be properly trained in LOTO procedures in accordance with OSHA regulations.
2.
Set the parking brake.
3.
If the equipment is parked on an incline, chock the wheels.
4.
Block or crib equipment that is suspended on jacks in order to prevent falling or shifting.
Note: If Reefer, follow Steps # 5-8; otherwise skip to Step # 9.
5.
Verify that the Main Power switch is set to the Off position.
6.
Set the Disconnect Switch to the Off position.
7.
Turn the Main Power switch to the On position, and then verify that the LOTO was successful.
8.
Return the Main Power switch to the Off position.