11
Questions about Cala Trio? Visit CalaTrio.com/HCPFAQs
LBL-5122 Rev C NOV 2019
Step 1:
To start a therapy session, from the time
display, press the
MAIN
button. You will now
see "start session"
Step 2:
Press the
MAIN
button again to start a session
Note:
"Tremor Task" measurements will be prompted
periodically before and after therapy sessions. Cala Trio
will prompt you in a similar way as described in section
5.2, steps 3-5, on page 9.
A therapy session with Cala Trio is easy to start and fit
into your day.
UP
button
DOWN
button
MAIN
button
Step 3:
If prompted, press the
MAIN
button to do your
prescribed ”Tremor Task”, or if you would like to
skip and are given the option, press the
DOWN
button and then
MAIN
to skip until next session
Step 4:
If prompted, do your "Tremor Task"
(
i.e., outstretched postural hold or wing-
beating postural hold
)
To complete your "Tremor Task"
•
You can find your "Tremor Task" in your prescription
information.
•
Get in position to do your "Tremor Task".
•
Press the
MAIN
button to start the measurement.
Note:
Once therapy starts, it automatically ramps to
your intensity preset while displaying "starting therapy."
Therapy is then 40 minutes of stimulation.
Note:
The "tingling" sensation of stimulation will naturally
vary from day to day. You can adjust the intensity as
needed to maintain a consistent sensation during therapy
and across sessions.
»
To stop the ramp to your preset, press any button.
»
Press the
UP
button to increase intensity.
»
Press the
DOWN
button to decrease intensity.
Step 5:
After collecting your "Tremor Task", Cala Trio will
ask if you want to start therapy. Press the
MAIN
button to start therapy
Step 6:
The 40-minute timer will begin countdown
•
Perform "Tremor Task" until all dots are blue
(~20 seconds).
UP
button
DOWN
button
MAIN
button
A THERAPY SESSION WITH Cala Trio™
View instructional videos at my.CalaTrio.com
6.0
