10
Questions about Cala Trio? Visit CalaTrio.com/HCPFAQs
LBL-5122 Rev C NOV 2019
Step 7: Once Measure 1 is saved, Cala Trio will prompt you
for Measures 2 and 3
•
Repeat the same process for Measures 2 and 3.
Note:
If you accidentally save a poor measurement
(e.g. you were walking or talking during the "Tremor
Task"), reset Cala Trio by pressing and holding the
UP
and
MAIN
buttons simultaneously for 3 seconds.
5.3 Setting Stimulation Intensity for Therapy
After calibrating Cala Trio to your tremor, you will set the
stimulation intensity preset.
•
Cala Trio automatically ramps to the intensity preset
during all subsequent therapies.
•
It is important to find the maximum level of therapy that
you can comfortably tolerate for 40 minutes.
Note:
You will always be able to increase or decrease the
intensity during therapy sessions as needed.
To set the intensity:
Step 1:
Press the
MAIN
button from "press main to set
intensity". Wait 3 seconds before moving to step 2
Step 2:
Press the
UP
button to slowly increase intensity.
You may not feel the sensation right away
UP
button
Step 3:
As you continue to press the
UP
button, you should
feel a tingling sensation in your hand and fingers in
the areas highlighted in the images above
Note:
Tingling sensation varies depending on Cala Trio
positioning and amount of water on the wrist.
»
You may feel a stinging sensation if you did not wet your
wrist sufficiently before fastening Cala Trio.
See the note below to add more water.
»
You should
not
feel the tingling sensation in your pinky.
Additionally, if you do not feel the tingling sensation in
the fingers highlighted in step 3, see the note below to
reposition Cala Trio.
If needed, to add more water and reposition
Cala Trio:
»
Press the
MAIN
button and wait for therapy to stop.
»
Press the
DOWN
button to highlight 'reset intensity'
and the
MAIN
button to select.
»
Add water to your wrist (
see section 5.1, page 8
) or
adjust the placement of the band (
see section 5.1,
step 3, page 8
).
»
Repeat steps 1-3 when you are ready to set your
intensity again (
see section 5.3, page 10
).
Step 4:
Once you find the highest intensity level that you
can
comfortably
tolerate for a 40-minute therapy
session, press the
MAIN
button to stop stimulation
Note:
Choose an intensity below a level that causes
discomfort or muscle contraction.
Step 5:
Press the
MAIN
button to save the intensity preset
Your Cala Trio therapy is
personalized and ready to use!
Reminder: Ensure you have dampened the entire
circumference of your wrist with ample amounts of water
before setting stimulation intensity.
