Cal Spas LES, Руководство пользователя

Страница: 28 / 64

27
3.4 LED Lighting 3.4 LED Lighting
Press the LIGHT button on the topside control panel to turn the spa light on. If your spa has perimeter LED lights,
they will also light on. If your spa has perimeter LED lights, they will also light up at the same time as the spa
light.
1. Cycle: When you continually press the LIGHT
button, the LEDs will cycle through the three main
LED colors (Red, Green, and Blue) or combinations
of the three that produce the following colors: light
green, purple, light blue, yellow, etc.
Each time you press the button, you immediately
advance to the next color in sequence or eventually a
different light pattern.
2. Flashing: Once you have cycled through all of
the colors, another press of the LIGHT button will
produce a flashing pattern.
3. Fading cycle: The next phase of operation when
you push the LIGHT button is a slow and/or fast
fade random transition from one color to the next.
• If a spa is equipped with more than 100 points of
light the slow fading cycle will flicker during a color
change.
• Every air valve is equipped with 2 LED points.
• Perimeter LEDs take 9 points of light.
• The waterfall takes 4 points of light.
The LEDs operate in three modes:
Spas with exterior corner LED lighting generally work in
the same mode as described above. The variations in
color and patterns provide you with multiple options
to suit almost any lighting preference.
3.3 Jets 3.3 Jets
Almost all of the jets in your spa are adjustable. Rotating the face of an adjustable
jet to the left (counterclockwise) will decrease the amount of water flow through the
jet. Rotating the face of an adjustable jet to the right (clockwise) will increase the
amount of water flow through the jet. (See example shown here.)
Neck jets adjust in the opposite directions (counterclockwise to increase, clockwise
to decrease).