Cal Spas Gazebos, Руководство пользователя

Страница: 32 / 52

Page 30 2008 Gazebo Owner’s Manual
LTR20081011, Rev. A
Luxury Gazebo Assembly
Step 2: Roof Frame Assembly
When assembling the roof frame, it is recommended that
you lay everything out and assemble it on a flat surface.
The owner should also note that there are different
sizes in the Luxury line of gazebos. These directions are
generalized, relating to measurements.
Check the parts list that came with your gazebo and
make sure that all the parts are present. Also, follow
the written steps in conjunction with the figures that are
shown.
Take four 2”x4”x98 1/2” pieces of wood and lay
them out on the ground (Figure A), in effect making
a square.
Place corner stabilizers (4 each) and attach in each
corner using 2 1/2” screws. Attach 2”x2”x24” splice
(4 each) at each center joint. This will reinforce the
roof frame (Figure A).
Use the provided 2 1/2” screws to attach all the
pieces together (Figure B).
Attach each corner together with the provided
screws, making sure to keep the 45 degree corners
pointing outward (Figure C - inset). This is the top
center frame.
1.
2.
3.
4.
Take the hip rafters (4 each) and attach them to
each corner of the top center frame. Make sure that
the 45 degree corner matches the 45 degree end on
the hip rafters (Figure D).
5.
10' Inside Diameter
Completed Roof Frame
2"x3"x98 1/2"
(4 each)
2"x2"x24
(4 each)
2"x3"x60"
(4 each)
Lay out roof frame as shown above. Use
screws to attach all pieces together
16" Inside Diameter
2"x4"x22 1/2"
(2 each)
2"x4"x94 1/2"
(2 each)
Top Center Frame
2'x8' Outside Diameter
Hip Rafter
Top Center Frame
Attach 4 each Hip rafters flush w/Top
with 3" screws
D
C
B
A
10' Inside Diameter
Completed Roof Frame
2"x3"x98 1/2"
(4 each)
2"x2"x24
(4 each)
2"x3"x60"
(4 each)
Lay out roof frame as shown above. Use
screws to attach all pieces together
16" Inside Diameter
2"x4"x22 1/2"
(2 each)
2"x4"x94 1/2"
(2 each)
Top Center Frame
2'x8' Outside Diameter
Hip Rafter
Top Center Frame
Attach 4 each Hip rafters flush w/Top
with 3" screws
D
C
B
A
10' Inside Diameter
Completed Roof Frame
2"x3"x98 1/2"
(4 each)
2"x2"x24
(4 each)
2"x3"x60"
(4 each)
Lay out roof frame as shown above. Use
screws to attach all pieces together
16" Inside Diameter
2"x4"x22 1/2"
(2 each)
2"x4"x94 1/2"
(2 each)
Top Center Frame
2'x8' Outside Diameter
Hip Rafter
Top Center Frame
Attach 4 each Hip rafters flush w/Top
with 3" screws
D
C
B
A