CalAmp | LMU-26xx Install Guide
Page 32
MBUD-0199v3.3
iii.
Use care to prevent accidentally shorting any connections. Power Connections
should meet aftermarket electronics industry installation practices
Figure 37:
vPOD With Harness 5C261
Figure 38:
vPOD With Harness 5C260 or 5C908
Figure 39: vPOD Adapter and Vehicle OBD-II Port
1.
Plug the vPOD Adapter directly into the vehicle’s OBD-II port (Figure 40).
The vehicle’s OBD-II port is located within three feet of the steering column. Consult the vehicle
owner’s manual if you have trouble finding the port.
2.
Ensure that all cables are secured with proper connections to components. Coil and secure loose or
excess cable, and ensure it is out of the way of normal vehicle operations. Verify that cables are not
stretched and do not rub on vehicle components, which could cause unexpected wear.
Aux 2
Aux 2
Connect White to
White Wire
Connect White to
White Wire