CalAmp | LMU-26xx Install Guide
Page 16
MBUD-0199v3.3
If hard wiring the device, the LMU-26xx power cable has 3 wires: 12 Volts continuous, 12 Volts ignition
switched, and ground.
All power connections must be insulated with electrical tape.
Use care to prevent accidentally shorting any connections. Power Connections should meet
aftermarket electronics industry installation practices.
Power connections, both Constant and Ignition, must be fused using the supplied in line 3A
fuses and holders.
All power connections must be made using manufacturer approved methods for adding
accessories to vehicles.
Figure 11: Power Leads
Ignition (White)
+12V (Red)
Ground (Black)