39
Initial Settings
Press the
record button to start recording.
Press the
stop button to stop recording.
Press the
play button to hear the recorded result.
If you’re not satisfied with your performance, you can easily re-record it. After you’ve stopped recording but before
you’ve performed any other operation, hold down the “Ctrl” key of your computer keyboard and press “Z.” The
waveform that had been displayed will disappear. Since you can re-record as easily as this, you can feel free to try as
many times as you like until you’ve captured a performance you’re happy with.
The sound of playback or recording may be interrupted if you connect or disconnect USB memory or another
USB device or turn the power on/off during these operations.
Using a USB-connected hard disk may decrease the hard disk data transfer rate due to congestion on the USB
data bus. Do not use a USB-connected hard disk to save the audio data that you are playing or recording.
Dropouts in playback or recording may occur immediately after the system has started up or resumed from the
sleep state. Please wait for a time before you perform playback or recording.
7. Record your performance.
VS-100_install_e.book 39 ページ ２００９年３月９日 月曜日 午後８時５６分
