Cairox SOLANO CEILING-N-100, Техническая документация инструкция

Страница: 14 / 16

14
S-ECM driver has a possibility to be connected to integrated Building Management System (BMS).
Connection must be made using 3-poliges wire to connectors:
IN-A; IN-B; GND (SIGNAL GROUND).
S-ECM Parameters:
Name
Description
Physical layer RS485
Protocol MODBUS-RTU
Baud rate 38400 [bps]
Parity Even
Data bits 8
STOP bits 1
S-TOUCH Parameters:
Name
Description
Physical layer RS485
Protocol MODBUS-RTU
Baud rate 9600-230400 [bps]
Parity Even
Data bits 8
STOP bits 1
NOTE :
In last appliance in line, dipswitch SW2 has
to be switched to the right
– T120.
NOTE: In last S-ECM in line, dipswitch SW2 has to be switched to the right – T120. The maximum length
of the connecting cable 50 m ( LIYCY-P 2x2x0,5mm
2
) .
It is possible to connect up to 31modules S-ECM and control them with one S-TOUCH controller.