Lib
er
at
ors
Safety
1
WARNING:
Medical electrical Equipment needs special precau-
tions regarding EMC and needs to be installed and put into service
according to the EMC information provided in this manual.
WARNING:
Portable and mobile RF communications equipment
can affect Medical Electrical Equipment.
Table 1
Guidance and Manufacturer’s declaration—electromagnetic emissions
The Liberator is intended for use in the electromagnetic environment specified below. The customer or the user of the Liberator should
assure that it is used in such an environment.
Emissions test
Compliance
Electromagnetic environment—guidance
RF emissions
Group 1
The Liberator uses RF energy only for internal function.
CISPR 11
Therefore, its RF emissions are very low and are not likely to
cause any interference in nearby electronic equipment.
RF emissions CISPR 11
Class B
Harmonic emissions
The Liberator is suitable for use in all establishments, including
IEC 61000-3-2
Not applicable
domestic establishments and those directly connected to the public
Voltage fluctuations/
low-voltage power supply network that supplies buildings used for
flicker emissions
Not applicable
domestic purposes.
IEC 61000-3-3
WARNING:
The use of Accessories, transducers, and cables other
than those specified by the manufacturer may result in increased
Emissions or decreased immunity of the Liberator.
WARNING:
The Liberator should not be used adjacent to or
stacked with other equipment, and that if adjacent or stacked use
is necessary, the Liberator should be observed to verify normal op-
eration in the configuration in which it will be used.
Liberators Technical Service Manual • PN 13350704 Rev
K
7
7
