8
Rev022520
Installation
Step 9
Illustration
Leave
1
/
4
”
of space between Gate End and inside of Gate Catch.
TOP VIEW
Step 8
Illustration A
Step 8
Illustration B
NOTICE
Base plates are slotted to allow adjustment for alignment.
STEP 9.
Mark out holes for the Gate Catch and anchor with
concrete floor anchors.
STEP 8.
Use rubber mallet to gently hammer flange bearings into both sides of 1
3
/
4
” Upper Lift Arm.
a. Slide the Gate End (
blue decal
) over the 1
3
/
4
” Upper Lift Arm (
blue decal
).
b. Insert
3
/
8
” x 2
3
/
4
” hex bolt and tighten
3
/
8
” nylock nut.
9.1
9.8
9.3
Blue
Decals
2
9.5
© CAI Safety Systems | (951) 465-7386 | https://caisafety.com | [email protected]
