background image

•  ProTUBE Scaffolds should not be 

used  for  storm,  snow,  ice,  excessive 

rain or lightning

•  Do not lift or held with a crane Pro-

TUBE Scaffolds.

•  ProTUBE Scaffolds should not be 

used for access to other structures.

•  Standard  configuration  calculations 

cannot include canvas and/or adverti-

sing display usage calculations.

2.2 Necessary Additional Inst-

ructions for Usage of ProTUBE 

Scaffolds

 

•  While working with ProTUBE Scaf-

folds  work  shoes,  work  gloves  and 

helmet must be worn.

•  ProTUBE Scaffolds should not be 

climbed from outer side and support, 

cross and horizontal parts should ne-

ver be stepped on.

•  Don’t increase the height of the plat-

form you are working on with a lad-

der, crate etc. (Diagram 1)

• 

•  The  floor  measurements  of  the  plat-

forms of the scaffold cannot be incre-

ased by using different materials.

•  Lifting equipment usage on the Pro-

TUBE Scaffolds should not be per-

mitted. This may seriously affect the 

balance. (Diagram 2);

•  The parts and tools on the working 

floor of ProTUBE Scaffolds can only 

be manually carried.

•  If ProTUBE Scaffolds are to be pla-

ced on a soft surface, there should be 

protection plates or U-profiles under 

the wheels, (Diagram 3)

3

• Wind load should be taken into conside-

ration in areas that are affected by wind 

such as open constructions, building cor-

ners etc. Scaffold usage should be stopped 

under wind powers that exceed 38 km/h 

(max. 6 Beaufort). It should not be trans-

ferred. If possible it should be fixed to the 

wall and ProTUBE Scaffold should be 

transferred to a place without wind when 

the wind power decreases. (Diagram 4)

Max. 38 km/h

•  National regulations and the measures 

should be taken into consideration for 

the wind loads.

•  Additional working platform and ot-

her objects should not be placed on 

the outer side of ProTUBE Scaffolds.

•  The  vertical  line  of  the  ProTUBE 

Scaffolds should not be bent to ex-

ceed 1%. Therefore the variation at 4 

meter height should not exceed 4 cm.

•  Take necessary precautions towards 

the weather conditions to work safely 

11

2

4

 

EN

Содержание ProTUBE F





































Отзывы: