1. Installation:
I.
Test the positioning of the fan
before starting installation. Place
one nut in each hex hole on
back of the backing plate before
mounting. Use the provided
double-sided tape to temporarily
attach backing plate to the wall.
Please note that this is a semi-
permanent adhesive.
THANK YOU FOR PURCHASING A SIROCCO II
ELITE
FAN!
READ AND SAVE THESE INSTRUCTIONS
Your new fan can be mounted on fibreglass, plywood, steel or aluminium.
Installation requires a Phillips screwdriver, pliers and six #6 fasteners (not
included).
Accessory Kit includes:
Backing plate
Hardware bag
Double-sided tape
Power cord
Place nuts in hex holes on back of backing
plate before mounting.
II.
Secure backing plate to wall
using six #6 fasteners (not
included).
Fasten here
Please Note:
The Sirocco II Elite features a powerful and efficient brushless motor. When
turning on the fan, there will be a slight hesitation before the blade starts to spin. This is normal
and is evidence that your fan is equipped with a long-lasting, high-performance, brushless
motor. If you have any questions or concerns about your new fan, please contact Customer
Service at:
1-800-567-3556
.
2
x 2.2mm brass nuts
2
x 3.2mm stainless steel
nuts
2
x lock washers
2
x screws
1
x backing plate
1
x double-sided adhesive
pad
1.
