Caframo Sirocco II Elite, Руководство по эксплуатации

Страница: 3 / 16

III. Wiring
Attach corresponding wires
a)
Ensure nuts are fully
tightened. Attach the
wire marked positive
to the positive base
screw, then negative
to negative base
screw.
Wire notch
Corresponding
holes
OR
Brass Nut
Lock
Washer
Wire
Base screw
Mounting Surface Screw Size Fastener Length Tin Type Head Type
Fiberglass
No.6
(3.5mm)
0.5"
(12 mm)
Drilling
Rounded
Wood Pointed
Steel Drilling
Aluminum Sheet Drilling
Aluminium Heavy gauge Drilling
Recommended Screw Chart for mounting
the Sirocco II Elite
b)
Secure wires as
shown in the
illustration to the
right. Use pliers to
tighten nuts.
Do not rely on hand
tightening.
c)
Depending on installation, feed wire through the notch on either end of
base
OR
through corresponding holes on the backing plate.
2.