![Caframo Real Torque Digital Stirrers Скачать руководство пользователя страница 7](http://html1.mh-extra.com/html/caframo/real-torque-digital-stirrers/real-torque-digital-stirrers_instruction-manual_3342222007.webp)
Technical Data
BDC1850 / 3030 / 6015
Voltage
120 volts @ 60 Hz
230 volts @ 50/60 Hz
Installation Category
(in accordance with IEC664)
II
II
Maximum Current Draw
3 Amps
3 Amps
Maximum Output Power
1/5 hp, 150 watts
Speed Readout
LCD 4 digit display
Speed Readout Accuracy
+/- 1 rpm or +/- 1% of reading
Torque Readout Accuracy
+/- 12 N-cm (1 in-lb) or +/- 5% of reading
Maximum Operating Noise
70 dB(A) at 1 meter
Motor Type
Brushless DC
Drive
2 stage transmission
Hollow drive shaft
Nitrated P .30 with 10 mm (3/8”) diameter bore
for stirring impellers
13 mm (0.51”) outside diameter for drive chuck
Chuck Guard
Length
67 mm, (2.64”)
Diameter 54 mm, (2.13”)
Molded of clear chemical resistant
polyurethane.
Seals
Butyl Rubber
IP 42
Holding chuck
3 prong stainless steel. Maximum opening
9.5 mm (3/8”) diameter
Protection measures:
0
Class
Protection device
Recommended use
0
No additional protection
Used only on equipment where failure of the
controls does not represent a hazard.
The operating conditions should be monitored at regular intervals.
Page 7