Caffitaly System S 21, Инструкция

Страница: 21 / 64

21
Saving energy
The machine will automatically reduce consumption after 10 minutes of inactivity.
Buttons A - B - C blink slowly and sequentially. To restore normal operating conditions,
press any button or raise the lever. The appliance will start warming up.
When buttons A - B - C turn on and remain steadily lit, the appliance is ready for use.
Daily maintenance
• Remove the drip tray and used capsule drawer (Fig. 6).
• Lift the used capsule drawer (Fig. 11); empty and rinse it.
• Remove the grid and its support (Fig. 12). Lift out the drip tray; empty and rinse it.
• Remove the water tank (Fig. 5); empty and rinse it.
NOTE : Traces of the product just dispensed may remain in the circuit of the machine.
To retain maximum beverage fl avour it is advisable - when dispensing milk, hot
chocolate or instant drinks - to perform a short rinse. Rinsing this is performed using
one of the cleaning capsule supplied and pressing any button (
A , B or C ).
We would advise you to carry out this procedure at least once a
week in any case.
When cleaning the surfaces of the The plastic components of the
appliance use a soft cloth and neutral machine, including the water
detergent. Do not use jets of water tank, ARE NOT dishwasher
to clean the appliance. safe.
Descaling
Descaling signal : when indicator light D blinks YELLOW , a descaling cycle should be carried
out, as illustrated below.
The machine features an advanced program that monitors how much water is used
to dispense beverages. This monitoring process provides the user with indications
as to when the machine needs to be descaled.
It is advisable to use the Caffi taly System descaling agent, designed to comply with the
technical characteristics of the machine, in full observance of consumer safety. The
descaling agent must be disposed of in compliance with manufacturer instructions
and/or with current regulations in force in the country where the appliance is used.
CAREFULLY read the directions for use on the packaging of the descaling agent.
Avoid contact with eyes, skin and machine surfaces.
During descaling do not turn the machine off and do not raise the lever. A person
must be present during the operation.
Do not use vinegar: it could damage your machine!