![background image](http://html1.mh-extra.com/html/cafe-0/cdt845p4nw2/cdt845p4nw2_installation-instructions-manual_3319241012.webp)
CONNECT DRAIN LINE
(CONT.)
• Connect drain line to air gap, waste tee or disposer
using the previously determined method. Secure
hose with a screw-type clamp.
Method 1 – Air gap with waste tee or disposer
Method 2 – “High drain loop” with waste tee or
disposer
With this method you will need the drain hose hanger
set aside in Step 1.
Fasten drain hose to underside of countertop with the
provided hanger.
IMPORTANT –
When connecting drain line to
disposer, check to be sure that drain plug has been
removed. DISHWASHER WILL NOT DRAIN IF PLUG
IS LEFT IN PLACE.
Tip: Avoid unnecessary service call charges for a
no drain complaint.
Make sure excess drain hose has been pulled through
the cabinet opening. This will prevent excess hose
in the dishwasher cavity from becoming kinked or
crushed by the dishwasher.
Dishwasher Installation
Remove
Drain
Plug
12
CONNECT DRAIN LINE
The molded end of the drain hose will fit 5/8” through 1”
diameter inlet ports on the air gap, waste tee or disposer.
• Determine size of inlet port.
• Cut drain hose connector on the marked line, if required,
to fit the inlet port.
• If a longer drain hose is required, replace the provided
user bag drain hose with Café part
WD24X10065
, a
12’ long hose which can be connected directly to the
drain loop already attached to the unit (see Step 7). If
service part hose is not available, an additional hose
with coupler, ID of 5/8” or 7/8” and no longer than
66”, may be attached to the provided user bag drain
hose. Secure the connection with hose clamp (obtain
locally) to the provided user bag drain hose.
NOTE:
• TOTAL DRAIN HOSE LENGTH MUST NOT EXCEED
16’ FROM THE REAR OF THE DISHWASHER FOR
PROPER DRAIN OPERATION.
Figure Z
Cutting Line
1"
5/8"
IMPORTANT:
Do not cut corrugated
portion of hose
STEP 17
STEP 17
Hose
Clamp
Coupler
Hose
Clamp
Figure AA
Drain Hose Hanger
18”
min.
32” min. -
72” max.
Drain Hose Hanger
18”
min.
32” min. -
72” max.
Figure AC
Waste Tee Installation
Disposer Installation
72”
max.
72”
max.
Figure AB
Waste Tee Installation
Disposer Installation