5.1 WALL-MOUNT INSTALLATION
10
D
ue to the many different materials used on different walls, it is highly recommended that you consult your
local builder before you install this appliance on the wall.
5 1.1
WALL-MOUNT INSTALLATION METHOD FOR CHFPV-20 AND SCW SERIES
.
SIDE
VIEW
18-1/2 (472mm)
"
6-3/4 (171mm)
"
Power Line
A
Have two people hold the appliance against the wall to determine the final
location
B.
Mark out location then mount the bracket onto the wall using the five supplied
screws
.
This bracket MUST have the hooks
and be leveled.
C.
With the wall mounting bracket installed, have two people lift the appliance
up and insert the two hooks on the bracket into the two slots on the back of the
appliance.
D.
Check the appliance for stability, ensuring that the bracket will not break
free
from the wall
.
.
.
,
facing upward
NOTE:
CHFPV-20, SCW-001, SCW-002, and SCW-003.
Below is the illustration of SCW-001, for the wall mount bracket and the quantity of wall
anchors that be used for other models, please see page3.
Wall-mount installation method for
NOTE:
screwed into the wall studs where possible. If the wall studs cannot
be used, ensure that the supplied plastic anchors are used to affix
the bracket to the wall and the bracket is adequately secured.
It is strongly recommended that the mounting bracket be
Wall anchor×5
Wall Mount Bracket
Hooks
REAR
VIEW
4 (102mm)
"
