CAEN
Electronic Instrumentation
DT55xxE Desktop HV Power Supply
11
CAEN HV Wrapper
CAEN HV Wrapper is a library, available either as a set of ANSI C functions or LabVI
EW™ VI’s. Such
set
provides the software developer an unified software interface for the control of CAEN Power Supplies.
This is a low level application in which the writing of the Control SW is assigned to the user. It contains a
generic software interface independent by the Power Supply models and by the communication path used
to exchange data with them.
CAEN HV Wrapper is logically located between an higher level application, such as GECO2020, and the
lower layer software libraries.
For more info please visit www.caen.it (products>firmware/software
section).
Power Supply Modules LabVIEW Instrument Driver
Power Supply Mod
ules LabVIEW Instrument Driver is a set of VI’S, developed for LabVIEW 2009 and later
releases (LabVIEW™ is a Trademark of National Instruments Corp.), that allow to configure and monitor
all parameters of remotely controlled CAEN Programmable HV Power Supply modules. Host PC shall run
LabVIEW 2009 or later releases and NI-VISA Run-Time Engine 5.3.
To install the Power Supply Modules LabVIEW Instrument Driver, g
o to CAEN web site in the “Software”
area, download the Power Supply Modules LabVIEW Instrument Driver installation package and follow
the Set Up instructions.
