Caen RFID R1280I, Техническое руководство

Страница: 15 / 83

CONFIGURATION MENU - skID Technical Information Manual 15
RF Power Up (mW)
Through the RF Power Up you can set the power level emitted by the reader. The RF Power Up is an
editable field and the default value is 500 mW. Accepted values are included in the range 0÷500. The RF
Power Up is expressed in mW
Note that, when the reader is configured in the EASY2READ profile, to set the RF Power Up you can also
use the CAEN RFID Easy Controller Application or the SetPower function of the SDK (Software
Development Kit) library.
EPCC1G2 Parameters

Q: Q parameter is useful for the optimization of the inventory efficiency. As a rule of thumb, if you
have to read a huge population of tags you need to select a high value for the Q parameter,
otherwise you can select a lower value. For more information on Q parameter see EPC Class1
Gen2 protocol specification [RD1]. The default value is 6, accepted values are included in the range
0÷15. Q parameter is an editable field.

Session: the Session used by the anticollision algorithm. The reader chooses one of four sessions
available (S0, S1, S2 and S3) and inventories tags within that session. For more information on
session see EPC Class1 Gen2 protocol specification [RD1]. Default value is EPC C1G2 Session =
S0. You can change the default value using the drop-down menu.
 Target A or B. For more information on target see EPC Class1 Gen2 protocol specification [RD1].
Default value is target = A. You can change the default value using the drop-down menu.
 Selected: ALL, NOT selected, selected. For more information on Selected see EPC Class1 Gen2
protocol specification [RD1]. Default value is selected = ALL. You can change the default value
using the drop-down menu