Introduction
EnBOX User’s Manual
12
The “Interlocks and general I/O connector” has the pinout configuration
shown in
Figure 3
:
Figure 3
: Interlock and general I/O connector
Pin #
Function
1-2
Reserved
3-4
Reserved
5-8
General purpose I/O
9-10
External interlock
The external and general purpose I/O pins are not yet used and are reserved for
future use.
On the rear panel of the EnBOX there is a small hole that gives access to a
reset button (“RST”), which can be used to reset the unit.
A RJ45 Ethernet connector (“ETH”), which is used to communicate with the
unit and a Small form-factor pluggable transceiver (“SFP”) which is used to
communicate with the BEST system are placed next to the reset button.
Pin #1
Pin #10
