manualshive.com logo in svg

CAE EndoVR, Руководство пользователя, Страница: 87 / 100

Поделиться
Скачать
CAE EndoVR Скачать руководство пользователя страница 87

Starting an ESD Simulation

73

PN:165K400000

The 

ENERGY

 menu will appear when a tool (except for the endo clips and the injection needle) is 

selected from the 

TOOLS

 menu. The 

ENERGY

 menu contains the following available coagulation 

energy options:

The 

INJECTION

 menu will appear when the needle or the dual knife (with injection available) is selected. 

It displays the quantity of liquid that has been injected to this point of the simulation. If pressed, that 
quantity is reset to 0 ml.

The

 Soft Coagulation 

option sets the tool’s coagulation energy to soft coagulation.

Note

: the

 Soft Coagulation 

option is the default coagulation energy option

The

 Swift Coagulation 

option sets the tool’s coagulation energy to swift coagulation.

The 

Injection Needle 

 indicates that an injection tool has been selected.

Press the 

Injection

 icon to reset the amount of liquid that has been injected. The green 

counter below the Injection icon indicates the amount of fluid that has been injected 

thus far in the simulation exercise.

Содержание EndoVR





































































































Отзывы:

Нет отзывов