TR-MAN-1500
Operator's Manual - Mini-Travellers
Page 4 of 83
Cadman Power Equipment ▪ BOX 100, Courtland, Ontario, Canada N0J-1E0 ▪ Phone: 519-688-2222 ▪ Fax: 519-688-2100 ▪ www.cadmanpower.com
Safety Precautions
Please take the time to read and
understand
this manual so that
unnecessary errors and risks are avoided. If you have any questions or
concerns, please contact
Cadman Power Equipment Limited
or your
local dealer/distributor.
DO NOT
move or operate this machine until you have
read and understand the instructions in this manual.
NEVER
allow untrained persons to operate this machine.
DO
NOT
attempt to service this machine while it is in
operation.
MAKE
CERTAIN
all mechanical tension has been
released and the battery is disconnected before
attempting any service on the machine.
MAKE CERTAIN
all water pressure has been released
before removing supply lines or adjusting sprinkler.
Pressurized water can be trapped within the supply hose
when the automatic sprinkler shut-off is engaged.
CHECK
all fasteners (nuts and bolts) regularly for
tightness.
PERFORM REQUIRED MAINTENANCE
as prescribed or as necessary to keep
this machine in safe operating condition.
KEEP ALL SPECTATORS
at a safe distance.
STAY CLEAR
of high pressure supply lines, especially when first pressurizing
the system.
STAY CLEAR
of power lines. Contact with power lines with irrigation water
WILL result in the machine being a conductor of electricity.
DO NOT
remove or alter any shielding on this machine.
BE CERTAIN
that the machine is securely anchored (using stabilizer feet)
before unwinding the hose.
KEEP CLEAR
of all moving parts.
NEVER
tow this machine at speeds greater than
10 mph / 16 km/h
and be
certain the tow vehicle has adequate braking capacity to maintain safe control at
all times.
REGULAR INSPECTION
of your pipe couplings, tubing and gaskets should be
a part of your regular set-up routine. Any defective parts MUST be replaced or
repaired before the machine is put into service.
This symbol, the safety-alert symbol, indicates a hazard. When you come
across the safety-alert symbol in this manual, make certain you fully
understand and abide by the given instructions or warnings.
Safety is just a word
until put into practice.
Safety must be the first
thing on your mind
when
operating
any
piece of machinery.
Failure to follow all
safety instructions can
result in serious injury
or death to you or any
spectators