Black plate (49,1)
Cadillac SRX Owner Manual (Include Mex) - 2012
Instruments and Controls
5-49
If you live in Canada, or you are
having difficulty programming
a gate operator or garage door
opener by using the
“
Programming
the Universal Remote System
”
procedures, regardless of where
you live, replace Step 2 under
“
Programming the Universal
Remote System
”
with the following:
Continue to press and hold
the Universal Remote system
button while you press and release
every two seconds (cycle) the
hand-held transmitter button
until the frequency signal has
been successfully accepted by
the Universal Remote system.
The Universal Remote system
indicator light will flash slowly at
first and then rapidly. Proceed with
Step 3 under
“
Programming the
Universal Remote System
”
to
complete.
Universal Remote System
Operation
Using the Universal Remote
System
Press and hold the appropriate
Universal Remote system button
for at least half of a second.
The indicator light will come on
while the signal is being transmitted.
Erasing Universal Remote
System Buttons
All programmed buttons should be
erased when the vehicle is sold or
the lease ends.
To erase all programmed buttons
on the Universal Remote system
device:
1. Press and hold down the
two outside buttons until
the indicator light begins to
flash. This should take about
10 seconds.
2. Release both buttons.
Reprogramming a Single
Universal Remote System
Button
To reprogram any of the three
Universal Remote system buttons:
1. Press and hold the desired
Universal Remote system
button. Do not release the
button.
2. The indicator light will begin to
flash after 20 seconds. Without
releasing the button, proceed
with Step 1 under
“
Programming
the Universal Remote System.
”
If you have questions or need help
programming the Universal Remote
system, call 1-800-355-3515 or go
to www.homelink.com. You may
also call the customer assistance
phone number under
Assistance Offices (U.S. and
Canada) on page 13
or
Assistance Offices (Mexico) on
page 13
.