With Rear Window Stored
1 Stand outside vehicle and, with
one hand against crossbar, support
the Midgate.
2 With other hand, turn Midgate
handle clockwise to release it.
Gently lower Midgate forward
until lying flat on folded rear seat.
Raise the Midgate
Raise Midgate with a firm swinging
motion to engage latches and secure
Midgate in its normal position. If rear
window has been stored, it can be
returned to its normal position by
following “Reinstall the rear window”
instructions.
CARGO COVER SYSTEM
Your vehicle is equipped with a
three-piece cargo cover system. Any
number of the three panels can be
installed to provide the exact
configuration of space and security to
meet your cargo-loading
requirements. See your Owner
Manual for more information.
Remove cargo cover panels
Unlatch panels and slide them out of
the cargo box rails. Panel #1 has
four latches; panels #2 and #3 have
two each. The reinstallation
procedure is a reversal of the
removal procedure.
Store cargo cover panels
The cargo cover panels can be stored
on either side of cargo bed using the
storage bag provided. To avoid
damage, store panels as shown
below. The bag’s anchor hooks must
be attached to tie-down locations in
cargo bed.
E
S
C
A
L
A
D
E
E
X
T
Caution: With the rear window stored and
the crossbar being lowered with the
Midgate, the Midgate will be noticeably
heavier. Use extra care.
Note: This convenience guide provides
only brief cargo cover operation
instructions. See your Owner Manual for
more detailed instructions.
1
2
3573 Escalade 9/3/03 7:13 PM Page 16
Содержание ESCALADE EXT 2004
Страница 20: ...3573 Escalade 9 3 03 7 13 PM Page 20 ...
