3. Simultaneously
press and hold
both the desired
button on
HomeLink and
the hand-held
transmitter
button. Do not release the buttons
until Step 4 has been completed.
4. The indicator light will flash slowly at
first and then rapidly after HomeLink
successfully receives the frequency
signal from the hand-held transmitter.
Release both buttons.
5. Press and hold the newly trained
HomeLink button and observe the
indicator light. If the indicator light
stays on constantly, programming is
complete and your device should
activate when the HomeLink button
is pressed and released.
To program the remaining two
HomeLink buttons, begin with Step 2
under “Program HomeLink.”
Do not repeat Step 1, as this will erase
all of the programmed channels.
STEERING WHEEL CONTROLS
(OnStar
®
/Radio)
1 This button will activate “personal
calling.” Pressing this button also acts
as a “barge in” for voice mail.
2 PROG: Sequence through stored
presets for AM, FM and XM radio.
3
SOURCE
: To select AM, FM1,
FM2, XM1, XM2 Satellite Radio,
cassette, CD, in-dash 6-Disc CD
Changer, RSE
4
SEEK
: Seek radio stations, CD
tracks
5
VOL
: Adjust Radio volume
AUTOMATIC HEADLAMP CONTROLS
Turn off Daytime Running Lamps (DRL)
and automatic headlamps
• Turn the exterior lamps knob (located
to the left of the steering wheel) to
OFF (
).
Activate the automatic headlamp
system
• Turn the exterior lamps knob to
AUTO. The automatic headlamp
system will turn on the front and rear
lamps.
Manually illuminate the parking
lamps, taillamps, instrument
panel/radio lights, license plate lamps
• Turn the exterior lamps knob to the
parking lamp position ( ).
Manually activate the headlamps, all
exterior tail/marker lamps and the
instrument panel/radio lights
• Turn the exterior lamps knob to this
position ( ).
Turn the fog lamps on or off
1 Press the fog lamp button located on
the left side of the instrument panel.
An indicator lamp will illuminate when
the fog lamps are on.
2 Press to turn cargo lamp on or off
E
S
C
A
L
A
D
E
E
X
T
Note: If your transmitter has a “rolling code”
feature, the above process may not work. Please
refer to your Owner Manual or contact HomeLink
at 1-800-335-3515 (www.homelink.com).
1
2
3
1
2
4
5
3573 Escalade 9/3/03 7:12 PM Page 10
Содержание ESCALADE EXT 2004
Страница 20: ...3573 Escalade 9 3 03 7 13 PM Page 20 ...