Cadillac Escalade Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-
15567102) - 2022 - CRC - 8/16/21
310
DRIVING AND OPERATING
Available camera views:
.
Rear Standard View
.
Hitch View
.
Bed View
.
Rear Trailer View
.
Interior Trailer View
.
Guidance Lines
.
Hitch Guidance
Troubleshooting
The Transparent Trailer calibration
may take longer than expected or not
calibrate if:
.
The vehicle is driven too fast during
calibration. Speed should be
maintained below 50 km/h
(31 mph).
.
The vehicle is not driven straight
during calibration. Steering should
be maintained as straight as
possible, excessive steering during
calibration may extend
calibration time.
.
The calibration is attempted in low
light. Calibration should be
attempted when there is enough
light.
.
The calibration is attempted during
adverse weather conditions.
Calibration during conditions such
as snow or heavy rain should be
avoided.
.
The road surface is not ideal for
calibration. Calibration should be
attempted on an alternate road
surface.
.
The accessory trailer cameras are
swapped at the hitch connector.
Ensure that the camera mounted to
the rear of the trailer is connected
to the rear trailer camera input.
.
The accessory trailer camera is
mounted, angled or rotated outside
of the defined mounting location
(see camera installation
instructions).
Distortion may be observed in the
calibrated Transparent Trailer View if:
.
The accessory trailer camera is
mounted, angled or rotated outside
of the defined mounting location
(see camera installation
instructions).
The Transparent Trailer icon may
appear grayed out if:
.
A compatible trailer profile is not
configured or a non-compatible
trailer profile is selected.
.
The vehicle is in R (Reverse).
.
The trailer is not connected.
.
The accessory rear trailer camera is
not connected or connected to the
incorrect input.
The preview may not be provided or
the wrong preview may be provided if:
.
The accessory cameras are not
recognized. Ensure that the
accessory camera(s) are connected
and power cycle the vehicle.
.
The accessory trailer cameras are
swapped at the hitch connector.
Ensure that the accessory camera(s)
are connected to the correct input.
.
The accessory trailer camera(s) are
connected to the correct camera
input.
.
The accessory trailer camera(s) are
not installed according to the
installation instructions.