Cadillac Escalade Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-
15567102) - 2022 - CRC - 8/16/21
DRIVING AND OPERATING
291
To begin steering manually, hold the
steering wheel firmly (with both
hands) using the highlighted regions
as shown in the picture below.
Any time the steering wheel light bar
flashes red, resume manual steering
immediately. The instrument cluster
light
^
, will also turn red and a
message will display in the Driver
Information Center (DIC). In addition,
beeps will sound, or the Safety Alert
Seat will vibrate. See
“
Collision/
Detection Systems
”
under
. After you begin
steering manually, then Super Cruise
will disengage.
The red flashing steering wheel light
bar could occur under any of the
following conditions:
.
Lane markings are poor or visibility
is limited.
.
The Driver Attention System (DAS)
does not detect that the driver's
head and eyes are directed toward
the road.
.
ACC is canceled.
.
The vehicle is on a tight curve,
or the lanes are too wide, or the
vehicle goes into a curve too fast.
.
The compatible road ends.
.
The vehicle is approaching an
intersection controlled by a traffic
light, stop sign, or other traffic
control device.
.
A Super Cruise system fault occurs.
.
Super Cruise is unable to complete
the lane change maneuver.
Attention to the Road
{
Warning
Super Cruise is a driver assistance
system and cannot accurately
detect or predict all situations.
Super Cruise is not a crash
avoidance system. To prevent
serious injury or death, you must
supervise the driving task and
monitor the road conditions. You
may need to respond to traffic
events by steering, braking,
or accelerating. See
. Super Cruise also
cannot determine whether you are
awake, asleep, impaired, or properly
focused on safe driving. The vehicle
could crash into other vehicles,
drive out of the lane, or drive off
the road. Complete attention is
always required while driving, even
while using Super Cruise. Be
prepared to take over steering or
apply the brakes at any time.