
Black plate (40,1)
Cadillac CUE Infotainment System - 2013 - CRC 2nd Edition - 5/31/12
40
Infotainment System
14.
/
BACK
.
Press to go back to the
previous menu.
15.
x
(Down Arrow)
.
Press to go down a list.
To use the remote control, aim it at
the transmitter window at either
seatback console and press the
buttons firmly. Direct sunlight or very
bright light could affect the ability of
the RSE transmitter to receive
signals from the remote control.
Check the batteries if the remote
control does not seem to be
working. See
“
Battery Replacement
”
later in this section. Objects
blocking the line of sight could also
affect the function of the remote
control.
If a CD, Blu-ray/DVD, or MP3 disc is
in the CD slot, the remote control
O
button can be used to turn on the
video screen display and start the
disc. The infotainment system can
also turn on the video screen
display.
Changing the RSE Video Screen
Settings
The brightness can be changed
from the setup menu using the
remote control. To change a setting:
1. Press MENU.
2. Select Brightness and then use
o
or
p
to adjust the settings.
3. Press
/
BACK to exit the
setup menu.
Notice:
Storing the remote
control in a hot area or in direct
sunlight can damage it, and the
repairs will not be covered by the
warranty. Storage in extreme cold
can weaken the batteries. Keep
the remote control stored in a
cool, dry place.
Battery Replacement
To change the remote control
batteries:
1. Insert a coin or key to pull up the
rear cover on the remote control.
2. Replace the two AAA batteries
in the compartment.
3. Replace the battery cover.
Remove the batteries from the
remote control if it will not be used
for an extended period of time.
RSE Troubleshooting
No power:
The ignition might not
be in ON/RUN or ACC/
ACCESSORY.
The picture does not fill the
screen. There are black borders
on the top and bottom or on both
sides or it looks stretched out:
Press the menu button on the
remote control to change the display
mode setting.
In auxiliary mode, the picture
moves or scrolls:
Check the
auxiliary input connections at both
devices.
The remote control does not
work:
Check to make sure there is
no obstruction between the remote
control and the transmitter window.