Cadillac BLS, Руководство пользователя

Страница: 99 / 272

99 Interior equipment
Overriding the pinch protection
If dirt, ice or similar create so much resist-
ance that the pinch protection engages in
the front electric windows (the window
cannot be closed), the pinch protection can
be temporarily disengaged and the window
closed.
1 Make sure the ignition is in position 3.
2 Press and hold the button on the
driver’s door while operating the window
in question.
3 Close the window in question.
The pinch protection will be active the next
time a window is operated.
Calibration
The front electric windows should be cali-
brated if automatic closing does not work or
if the battery has been disconnected. The
pinch protection will not work if the windows
are not calibrated
3
.
Calibration is performed as follows:
1 Close the doors.
2 The car must be running at idling speed.
The battery charger must not be con-
nected to the car’s battery during cali-
bration.
3 Open the window fully, the button must
be kept depressed the whole time.
4 Close the window fully, the button must
be kept raised the whole time and for
approx. 1 second after the window has
closed.
5 Open the window fully, the button must
be kept depressed the whole time and
for approx. 1 second after the window
has fully opened.
6 Close the window fully, and keep the
button raised until the calibration is
confirmed with a "chime".
Repeat steps 3-6 for the windows which
require calibration.
WARNING
Make sure nothing obstructs the window
when it is closed without pinch protection.
WARNING
The pinch protection will not be engaged
after a power break until the electric win-
dows have been calibrated.
Button for temporary deactivation of rear
door window switches and temporary
override of window pinch protection
460_OM_MY09.book Page 99 Wednesday, April 2, 2008 10:32 AM