Cadillac ATS 2013, Руководство пользователя

Страница: 281 / 326

Black plate (45,1)
Cadillac ATS (Europe) - 2013 - crc - 10/8/12
Vehicle Care 10-45
Directional tyres should not be
rotated. Each tyre and wheel
should be used only in the
position it is in. Directional tyres
will have an arrow on the tyre
indicating the proper direction of
rotation or will have
“ left ” or
“ right ” moulded on the sidewall.
Use this rotation pattern if the
vehicle has different size tyres
on the front and rear and they
are non-directional.
Different tyre sizes should not
be rotated front to rear.
Use this rotation pattern when
rotating tyres of the same size
installed on all four wheel
positions.
If the vehicle has a compact
spare tyre, do not include it in
the tyre rotation.
Adjust the front and rear tyres to
the recommended inflation
pressure on the Tyre and
Loading Information label after
the tyres have been rotated. See
Tyre Pressure on page 10 ‑ 38
and Vehicle Load Limits on
page 9 ‑ 9 .
Reset the Tyre Pressure Monitor
System. See
Tyre Pressure
Monitor Operation on
page 10
‑ 41 .
Check that all wheel nuts are
properly tightened. See
“ Wheel
Nut Torque ” under Capacities
and Specifications on
page 12
‑ 2 .
{
WARNING
Rust or dirt on a wheel, or on the
parts to which it is fastened, can
make wheel nuts become loose
after time. The wheel could come
off and cause an accident. When
changing a wheel, remove any
rust or dirt from places where the
wheel attaches to the vehicle. In
(Continued)