Cadillac 2014 Escalade Скачать руководство пользователя страница 458 | Manualshive

Страница: 458 / 542

Cadillac 2014 Escalade Скачать руководство пользователя страница 458

Black plate (58,1)

Cadillac Escalade/Escalade ESV Owner Manual (GMNA-Localizing-MidEast-

6963932) - 2014 - crc - 5/21/13

10-58

Vehicle Care

There are two minutes to match the
first tire/wheel position, and
five minutes overall to match all four
tire/wheel positions. If it takes
longer, the matching process stops
and must be restarted.

The TPMS sensor matching process
is outlined below:

1. Set the parking brake.

2. Turn the ignition to ON/RUN with

the engine off.

3. Press

Q

and

K

on the Remote

Keyless Entry (RKE) transmitter
at the same time for
approximately five seconds. The
horn sounds twice to signal the
receiver is in relearn mode and
TIRE LEARNING ACTIVE
message displays on the DIC
screen.

4. Start with the driver side

front tire.

5. Place the relearn tool against

the tire sidewall, near the valve
stem. Then press the button to
activate the TPMS sensor.
A horn chirp confirms that the
sensor identification code has
been matched to this tire and
wheel position.

6. Proceed to the passenger side

front tire, and repeat the
procedure in Step 5.

7. Proceed to the passenger side

rear tire, and repeat the
procedure in Step 5.

8. Proceed to the driver side rear

tire, and repeat the procedure in
Step 5. The horn sounds two
times to indicate the sensor
identification code has been
matched to the driver side rear
tire, and the TPMS sensor
matching process is no longer
active. The TIRE LEARNING
ACTIVE message on the DIC
display screen goes off.

9. Turn the ignition to LOCK/OFF.

10. Set all four tires to the

recommended air pressure
level as indicated on the Tire
and Loading Information label.

Tire Inspection

We recommend that the tires,
including the spare tire, if the
vehicle has one, be inspected
for signs of wear or damage at
least once a month.

«
...
456
457
458
459
460
...
»

Содержание 2014 Escalade































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов