Cadillac 2014 Escalade Скачать руководство пользователя страница 44 | Manualshive

Страница: 44 / 542

Cadillac 2014 Escalade Скачать руководство пользователя страница 44

Black plate (14,1)

Cadillac Escalade/Escalade ESV Owner Manual (GMNA-Localizing-MidEast-

6963932) - 2014 - crc - 5/21/13

2-14

Keys, Doors, and Windows

the power function will deactivate
and a message will display in the
Driver Information Center (DIC).
See

Object Detection System

Messages on page 5-37

. After

removing the obstructions, the
liftgate will resume normal power
operation.

Pinch sensors are located on the
side edges of the liftgate. If an
object is caught between the liftgate
and the vehicle and presses against
this sensor, the liftgate will reverse
direction and open fully. The liftgate
will remain open until it is activated
again or closed manually.

Manual Operation of Power
Liftgate

To change the liftgate to manual
operation, press OFF on the liftgate
switch.

With the power liftgate disabled and
all of the doors unlocked, the liftgate
can be manually opened and
closed.

To open the liftgate, press the touch
pad on the handle (B) and lift up.
Use the pull cup to lower and close
the liftgate. Do not press the touch
pad while closing the liftgate. This
will cause the liftgate to be
unlatched. The liftgate latch will
power close. Always close the
liftgate before driving.

If

8

on the RKE transmitter or

l

on the liftgate is pressed while

power operation is disabled, the
lamps will flash three times, but the
liftgate will not move.

It is not recommended to drive with
the liftgate open, however, when
driving with the liftgate open; the
liftgate should be set to manual
operation by pressing OFF on the
liftgate switch on the center console.

The liftgate has an electric latch.
If the battery is disconnected or has
low voltage, the liftgate will not
open. The liftgate will resume
operation when the battery is
reconnected and charged.

«
...
42
43
44
45
46
...
»

Содержание 2014 Escalade































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов