![background image](http://html.mh-extra.com/html/cadillac/2014-elr/2014-elr_owners-manual_481721201.webp)
Black plate (3,1)
Cadillac CTS Owner Manual (GMNA-Localizing-MidEast-6882317) - 2014 -
CRC - 9/19/13
Lighting
6-3
The high-beam headlamps remain
on, under the automatic control,
until one of the following situations
occurs:
.
The system detects an
approaching vehicle's
headlamps.
.
The system detects a preceding
vehicle's taillamps.
.
The outside light is bright
enough that high-beam
headlamps are not required.
.
The vehicle's speed drops below
20 km/h (12 mph).
.
The turn signal lever is moved
forward to the high-beam
position or the Flash-to-Pass
feature is used. See
Headlamp
High/Low-Beam Changer on
page 6-4
and
Flash-to-Pass on
page 6-4
.
.
The IntelliBeam system can be
disabled by the High/Low-Beam
Changer or the Flash-to-Pass
feature. If this happens, the
High/Low-Beam Changer must
be activated two times within
five seconds to reactivate the
IntelliBeam system. The
instrument cluster light will come
on to indicate the IntelliBeam is
reactivated.
The high beams may not turn off
automatically if the system cannot
detect other vehicle's lamps
because of any of the following:
.
The other vehicle's lamp(s) are
missing, damaged, obstructed
from view, or otherwise
undetected.
.
The other vehicle's lamp(s) are
covered with dirt, snow, and/or
road spray.
.
The other vehicle's lamp(s)
cannot be detected due to dense
exhaust, smoke, fog, snow, road
spray, mist, or other airborne
obstructions.
Содержание 2014 ELR
Страница 6: ...Black plate 6 1 Cadillac CTS Owner Manual 2014 CRC 9 19 13 vi Introduction 2 NOTES ...
Страница 404: ...Black plate 92 1 Cadillac CTS Owner Manual GMNA Localizing MidEast 6882317 2014 CRC 9 19 13 10 92 Vehicle Care 2 NOTES ...
Страница 422: ...Black plate 6 1 Cadillac CTS Owner Manual GMNA Localizing MidEast 6882317 2014 CRC 9 19 13 12 6 Technical Data 2 NOTES ...
Страница 438: ...Black plate 12 1 Cadillac CTS Owner Manual 2014 CRC 9 19 13 i 12 INDEX 2 NOTES ...