Over Armour Offroad
2515 Bypass Rd. Flemingsburg, KY 41041
606-845-7439
Instructions for Installation and Care of
Textron Stampede 4
Soft Top Cap
TX-STAMP-4-TC01
Notice: Do not smoke inside the cab or expose the enclosure to direct flames. Cab is Flammable.
1.
Be sure to read these instructions thoroughly before opening and installing the Textron
Stampede 4 Soft Top Cap. The installation is best done when the temperature is 70
degrees F. or warmer. The temperature affects the adhesive Velcro, if conditions prevent
installing in warmer weather it helps to store the adhesive Velcro at room temperature
prior to installation.
2.
Carefully open the carton and remove the enclosure on a large flat surface that is clean
and free of dirt.
3.
Check over the parts included in the carton with the parts list shown below:
Adhesive Velcro Hook Strips:
“ “ “ “
4 each------------6"
36” Webbing Straps w/ Loop
4 each
30” Webbing Straps w/ Velcro
4 each
