![background image](http://html.mh-extra.com/html/cadillac/2013-xts/2013-xts_owners-manual_481691263.webp)
Black plate (35,1)
Cadillac XTS Owner Manual - 2013 - 1st - 4/13/12
Driving and Operating
9-35
WARNING (CONTINUED)
Do not use Adaptive Cruise
Control when:
.
On winding and hilly roads or
when the sensors are
blocked by snow, ice, or dirt.
The system may not detect a
vehicle ahead. Keep the
entire front of the vehicle
clean.
.
Visibility is low, such as in
fog, rain, or snow conditions.
Adaptive Cruise Control
performance is limited under
these conditions.
.
On slippery roads where fast
changes in tire traction can
cause excessive wheel slip.
]
(On/Off):
Press to turn the
system on or off.
+RES (Resume/Accelerate):
Press the control up briefly to
resume the previous set speed or to
increase vehicle speed if ACC is
already activated. To increase
speed by 1 km/h (1 mph), press
+RES up to the first detent. To
increase speed by 5 km/h (5 mph)
increments, press +RES up to the
second detent.
SET
–
(Set/Coast):
Press the
control down briefly to set the speed
and activate ACC or to decrease
vehicle speed if ACC is already
activated. To decrease speed by
1 km/h (1 mph), press SET
−
down to
the first detent. To decrease speed
by 5 km/h (5 mph) increments, press
SET
−
down to the second detent.
*
(Cancel):
Press to disengage
ACC without erasing the selected
set speed.
3
(Follow Distance Gap):
Press
to select a following gap time (or
distance) setting for ACC. Select a
gap setting: Far, Medium, or Near.
Setting Adaptive Cruise Control
If the cruise button is on when not in
use, it could get pressed and go into
cruise when not desired. Keep the
cruise control button off when cruise
is not being used.
Select the set speed desired for
cruise. This is the vehicle speed
when no vehicle is detected in
its path.