Cadillac 2009 ESCALADE ESV, Руководство пользователя

Страница: 187 / 602

•
The exterior lamp control is turned to any setting
except AUTO.
When this occurs, IntelliBeam
®
will be disabled until
the control is turned back to the AUTO position.
•
The IntelliBeam
®
system is turned off at the inside
rearview mirror.
IntelliBeam
®
may not turn off the high-beams if the
system cannot detect other vehicle’s lamps because
of any of the following:
•
The others vehicle’s lamp(s) are missing, damaged,
obstructed from view or otherwise undetected.
•
The other vehicle’s lamp(s) are covered with dirt,
snow and/or road spray.
•
The other vehicle’s lamp(s) cannot be detected due
to dense exhaust, smoke, fog, snow, road spray,
mist or other airborne obstructions.
•
Your vehicle’s windshield is dirty, cracked or
obstructed by something that blocks the view
of the IntelliBeam light sensor.
•
Your vehicle’s windshield is covered with ice, dirt,
haze or other obstructions.
•
Your vehicle is loaded such that the front end of
the vehicle points upward, causing the IntelliBeam
sensor to aim high and not detect headlamps
and taillamps.
•
You are driving on winding or hilly roads.
You may need to manually disable or cancel the
high-beam headlamps by turning the low-beam
headlamps on, if any of the above conditions exist.
3-19