Cadillac 2007 Escalade, Руководство пользователя, Страница: 14 / 570

If you use the remote keyless entry transmitter to
enter your vehicle and the remote recall memory
feature is on, automatic seat, mirror, and adjustable
pedal movement will occur. See “MEMORY SEAT
RECALL” under
DIC Vehicle Customization on
page 254 for more information.
To stop recall movement of the memory feature at
any time, press one of the power seat controls,
memory buttons, power mirror buttons, or
adjustable pedal switch.
If something has blocked the driver’s seat and/or
the adjustable pedals while recalling a memory
position, the driver’s seat and/or the adjustable
pedals recall may stop working. If this happens,
press the appropriate control for the area that
is not recalling for two seconds, after the
obstruction is removed. Then try recalling the
memory position again by pressing the appropriate
memory button. If the memory position is still
not recalling, see your GM dealer for service.
Easy Exit Seat
The control for this feature is located on the
driver’s door panel between buttons 1 and 2.
With the vehicle in PARK (P), the exit position
can be recalled by pressing the exit button.
You will hear a single beep. The driver’s seat
will move back.
If the easy exit seat feature is on in the Driver
Information Center (DIC), automatic seat
movement will occur when the key is removed
from the ignition. See “EASY EXIT SEAT” under
DIC Vehicle Customization on page 254 for
more information.
Further programming for the memory seat feature
can be done using the DIC. You can select or
not select the following:
•
The automatic easy exit seat feature
•
The remote memory seat recall feature
For programming information, see DIC Vehicle
Customization on page 254 .
14