Cadillac 2007 DTS, Руководство пользователя

Страница: 188 / 508

Driving with IntelliBeam™
IntelliBeam™ only activates the high-beams when
driving over 20 mph (32 km/h).
The high-beam headlamps remain on, under the
automatic control of IntelliBeam™, until any of
the following situations occur:
•
The system detects an approaching
vehicle’s headlamps.
•
The system detects a preceding
vehicle’s taillamps.
•
The outside light is bright enough that
high-beam headlamps are not required.
•
The vehicle’s speed drops below
15 mph (24 km/h).
•
The headlamp stalk is moved forward to the
high-beam position or the flash-to-pass
feature is used. See
Headlamp
High/Low-Beam Changer on page 161 and
Flash-to-Pass on page 165 .
When either of these conditions occur, the
IntelliBeam™ feature is disabled and the
IntelliBeam™ light in the mirror turns off until
the high-beam stalk is returned to the
neutral position.
•
If IntelliBeam™ was using low-beams prior to
this action, the IntelliBeam™ feature is
temporarily disabled until the stalk is returned
to the neutral position.
•
The exterior lamp control is turned to any
setting except AUTO.
When this occurs, IntelliBeam™ is disabled
until the control is turned back to the
AUTO position.
•
The IntelliBeam™ system is turned off at the
inside rearview mirror.
IntelliBeam™ might not turn off the high-beams if
the system cannot detect other vehicle’s lamps
because of any of the following:
•
The other vehicle’s lamp(s) are missing,
damaged, obstructed from view, or otherwise
undetected.
•
The other vehicle’s lamp(s) are covered with
dirt, snow, and/or road spray.
188