2-23
Canadian Owners: If you lose or damage your keys,
only a GM dealer can service the theft
-
deterrent system
to have new keys made. To program additional keys you
will require two current driver’s keys. You must add a
step to the following procedure. After Step 2, repeat
Steps 1 and 2 with the second current driver’s key.
Then continue with Step 3.
To program a new key do the following:
1. Verify that the new key has PK3+ stamped on it.
2. Insert the current driver’s key in the ignition and
start the engine. If the engine will not start see your
dealer for service.
3. After the engine has started, turn the key to OFF, and
remove the key.
4. Insert the key to be programmed and turn it to ON
within ten seconds of removing the previous key.
5. The security light will turn off once the key has been
programmed. It may not be apparent that the security
light went on due to how quickly the key is
programmed.
6. Repeat the Steps 1 through 4 if additional keys are to
be programmed.
If you are ever driving and the security light comes on
and stays on, you will be able to restart your engine if
you turn it off. The theft
-
deterrent system, however, is
not working properly and must be serviced by your
dealer. Your vehicle is not protected by the
theft
-
deterrent system at this time.
In an emergency, contact Cadillac Roadside Assistance.
See “Roadside Assistance” in the Index.
Содержание 2003 CTS
