Cadillac 2003 CTS, Руководство пользователя

Страница: 234 / 435

3-13
Setting Preset Stations
The six numbered pushbuttons (F1 through F6) let
you return to your favorite stations. You can set up to
18 stations (six AM, six FM1 and six FM2). You can
set your preset stations manually or automatically and
presets for home and away.
To set your preset stations manually, perform the
following steps:
1. Turn the radio on.
2. Press BAND to select AM, FM1 or FM2.
3. Tune in the desired station.
4. Press and hold one of the six numbered pushbuttons
for two seconds until you hear a beep. The set preset
station number will appear on the display above the
pushbutton that it is set to. Whenever you press that
numbered pushbutton for less than two seconds, the
station you set will return.
5. Repeat the steps for each pushbutton.
To set your preset stations with an equalization
setting, DSP setting, or a PTY setting, see each of
these features later in this section. When a preset
station is selected, once one of these additional
settings is selected, the preset station will remember
each setting and it will remain active, until the
setting is selected off for that preset station.
AUTOSTORE PRESETS: To set your preset stations
automatically, perform the following steps:
1. Turn the radio on.
2. Press BAND to select AM, FM1 or FM2.
3. Press the TUNE/SEL knob to enter the main menu.
4. Turn the TUNE/SEL knob until AUTOSTORE
PRESETS appears on the display.
5. Press the TUNE/SEL knob again to select.
AUTOSTORE will appear on the display. The radio
will automatically search the band and select and
store the six radio stations with the strongest signal.
The stations will be stored by signal strength, not
sequential order. The set preset station number will
appear on the display above the pushbutton that it is
set to. Whenever you press that numbered
pushbutton for less than two seconds, the station that
is set will return.
6. Press the BACK button to exit the display. To return
to the original display repeatedly press the BACK
button or wait for the display to time out.
When battery power is removed and later applied, you
will not have to reset your radio presets because they
remain in the radios memory.