Cadi Cadi.Sense, Руководство пользователя

Страница: 28 / 36

Cadi. Sense User Manual
T-S1-800.900-I10-C01 28
 Click the “Connect to WiFi Router” icon. When a screen appears and asks “Please
select your WiFi router”, click your router’s SSID, type in your router’s password, and
then click “Apply”. Be patient as the SmartNode needs about 1 minute to connect to
your WiFi router and about one minute to reboot. Click “Refresh” if you do not see
your router’s SSID on the list.
Note (a): After successful connection to your WiFi router, the SmartNode will remember the
router’s SSID and password, unless you have intentionally unmarked the default “Remember
Settings” during the connection. So if you were to switch the SmartNode off and on again, it
will automatically reconnect to your WiFi router in about 2 minutes.
Note (b): After successful connection to your WiFi router, you may not be able to use
“http://10.10.10.10” to access your SmartNode anymore. Nonetheless you can still access it
using the IP address assigned by your router.
Note (c): You may need to reboot your PC/laptop, or unplug the Ethernet cable and then
plug it in again, to connect to the SmartNode. For certain brands of WiFi routers, you may
need to enable “Enhanced Compatibility” if you are using Windows 7.
Using the SmartNode as a WiFi repeater
Once the WiFi connection between the SmartNode and your main router/AP is established,
you can connect your WiFi devices like laptops and smartphones through the SmartNode
SSID. These devices will obtain an IP address from the main AP/router and should be able to
access the Internet from farther locations previously unreachable by your WiFi signal.
Configuring the SmartNode for use as a WiFi AP
The SmartNode can also be configured as a WiFi access point (AP) to turn a regular modem-
router into a WiFi-capable networking device to connect WiFi-enabled devices such as
laptops and smartphones.