Cadi.Sense Wireless Thermometer, Руководство пользователя, Страница: 9 / 36

Cadi. Sense User Manual
T-S1-800.900-I10-B01 9
Note (b): If the connection is successful , the following text will appear: “SmartNode is
now connected to xxxxxx. To access SmartNode, please go to www.cadisense.com or
use the LAN URL. Please be patient as SmartNode needs about a minute to reboot.”
Figure 6 shall then appear. However if the connection is
not successful , the following text
will appear: “Connection failed – please try again, or switch off and on SmartNode then
try again.”
Note (c): After successful connection to your WiFi router, SmartNode will remember the
router’s SSID and password (unless you have intentionally unmarked the default
“Remember Settings” during connection). So if you were to switch off and on SmartNode,
it will automatically re-connect to your WiFi router, taking about 2 minutes.
Step 2:
After successful connection to your WiFi router, you may not be able to use
“http://10.10.10.10” to access your SmartNode anymore. Nonetheless you can still
access it using the
LAN URL
(in the example shown in Figure 6, the LAN URL is
http://10.0.0.84).
Step 3:
You may now use a mobile device (iPhone, Android phone, tablet or laptop) to access
your Cadi.Sense anywhere in the world! Go to “
www.cadisense.com ”, then click
“Access Cadi.Sense”. Key in your SmartNode ID (which can be found on your
SmartNode, and you should have written it down in the beginning of Section 2.1),
password is “
cadi ”, default port is “ 50000 ”, then click “Login”. If your router has UPNP
enabled or if you have setup port forwarding (for details please refer to “Advanced
Setup – Port Forwarding for Your WiFi Router”), then Figure 8 shall appear, otherwise Figure
7 shall appear.
Figure 7. Cadi.Sense page without UPNP / Port Forwarding setup.
Figure 8. Cadi.Sense page with UPNP / Port Forwarding setup.